About Vulcan Cold Finished

Vulcan Cold Finish was started as a division of Vulcan Threaded Products in 1997.

Vulcan Cold Finish, originally known as Vulcan Steel and Wire, started as a wire producer but quickly found their niche in small diameter rounds. Like the threaded rod division, the cold finish division emphasized inventory and customer service and quickly established themselves as a market force in the South, Midwest and Southwest.

Adding two Schumags in 2001 increased the cold finish round size range to 1.250. The first draw bench was installed in 2002 increasing the round range to 3 inch diameter. A second draw bench was added in 2005 increasing the round size range to 4 inch diameter and taking the total capacity to 40,000 tons. Vulcan Cold Finish is the only cold finisher in the United States to produce cold finished rounds from 3/16 inch diameter to 4 inch diameter carbon and alloy bars out of the same facility.

Vulcan Cold Finish also produces flats from ½ x 1” through 2 x 4” and squares and hexagons from 3/8” through 3” diameter.